Products Description
Basic information
Its melting point is -89.5°C. Isopropyl alcohol can be completely miscible in most solvents such as water, ethanol and chloroform, and can dissolve a variety of non-polar compounds, showing its characteristics as a multi-functional solvent. In addition, it is a flammable substance that releases water and acetone when it reacts with oxidants.
Risk profile
Health hazard
1). Inhalation: High concentration of vapor can cause headache, dizziness, lethargy, nausea and other symptoms.
2). Skin contact: may cause dry, chapped skin.
3). Eye contact: can cause serious eye irritation, resulting in redness and pain.
4) Ingestion: May cause abdominal pain, vomiting, coma, and can be fatal in severe cases.
First aid measure
1). Inhalation: Quickly move the patient to fresh air. If breathing is difficult, give oxygen; If breathing stops, give artificial respiration immediately and seek medical attention.
2). Skin contact: Remove contaminated clothing and rinse skin thoroughly with soap and plenty of water. If agitated, seek medical help.
3). Eye contact: Immediately rinse with plenty of water for at least 15 minutes, keeping eyelids open, and seek medical attention.
4). Intake: Drink plenty of warm water to induce vomiting. Have a stomach lavage. Seek medical attention.
Protective measure
Engineering control: Use in a well-ventilated environment to avoid steam accumulation.
Personal protection
1). Respiratory protection: Wear appropriate respiratory protection equipment when necessary.
2). Skin protection: Wear protective gloves and protective clothing to avoid skin contact.
3). Eye protection: wear safety glasses or face mask.
Products Description
Store
1). Store in a cool, ventilated and dry warehouse, away from fire and heat sources.
2). The storage temperature should not exceed 30℃.
3). Seal with container.
4). It should be stored separately from oxidants, acids, halogens, etc., and should not be mixed.
Transport
1) Transport vehicles should be equipped with the appropriate variety and quantity of fire equipment and leakage emergency treatment equipment.
2). It is best to transport early and early in summer.
3). The tank truck used in transportation should have a grounding chain, and a hole partition can be provided in the slot to reduce static electricity generated by shock.
4). It is strictly prohibited to mix with oxidants, acids, halogens, food chemicals, etc.
5). During transportation, it should be protected from exposure to sunlight, rain and high temperature.
6). Stay away from fire, heat sources and high temperature areas.
7). The exhaust pipe of the vehicle carrying the article must be equipped with a fire retardant device, and the loading and unloading of mechanical equipment and tools that are easy to produce sparks is prohibited.
